Service > Technical Information > Service Bulletins > General service bulletins
General service bulletins


Sachs NA Technical Service Bulletin 34

  • Affected Models: Various
  • Kit Number: Sachs Clutch Kits using SB770
  • Problem: Possibility of installing the bearing incorrectly.

Download von tsb 34 Download TSB 34

Sachs NA Technical Service Bulletin 33

  • Affected Models: Various
  • Kit Number: K0058-01, K0058-01HD
  • Problem: The disc in the kit is approximately 3/8 inch smaller in diameter than the pressure plate.

Download von tsb 33 Download TSB 33

Sachs NA Technical Service Bulletin 32

  • Affected Models: Clutch Kits with Cam-Hub Vs Non Cam-Hub Discs
  • Kit Number: Various

Download von tsb 32 Download TSB 32

Sachs NA Technical Service Bulletin 30

  • Affected Models: All Vehicles using a Dual Mass Flywheel
  • Kit Number: Various
  • Problem: Installation and Warranty information

Download von tsb 30 Download TSB 30

Sachs NA Technical Service Bulletin 29

  • Affected Models: Hydraulic Slave Cylinders without Bleed Screws
  • Kit Number: Various
  • Problem: No bleed port present on new slave cylinder.
  • Solution: Specific Bleed Procedures outlined

Download von tsb 29 Download TSB 29

Sachs NA Technical Service Bulletin 27

  • Affected Models: All Clutch Kits With Hydraulic Release Systems
  • Kit Number: Various
  • Problem: Possible No Release Condition
  • Solution: Hydraulic System Bleed Procedures

Download von tsb 27 Download TSB 27

print this page
recommend this page
create bookmark for this page